FRP Tanks In High Quality

The company can produce various specifications of FRP storage tanks with a diameter of less than 10 meters, with an annual production capacity of 20000 tons. The FRP storage tank is generally composed of four layers: inner surface layer, inner layer, reinforcement layer, and outer surface layer. Other layered structures can also be adopted as needed; The thickness of the inner surface layer is 0.25-0.5mm, and the thickness of the inner layer is not less than 2mm. The thickness of the strength layer is determined by design calculations. The thickness of the outer surface layer is 0.2-0.5mm. On the premise of meeting the design requirements, the wall thickness of vertical storage tanks is allowed to be thin at the top and thick at the bottom. The resin mass content of the surface layer and inner layer inside the tank is 80%~90% and 68%~78%, respectively; The reinforcement layer is between 25% and 40%; The outer surface layer shall not be less than 70%. The cone angle of the inner wall shall not exceed 1 ° u12290X, and the allowable circumferential strain of the tank wall under loading conditions shall not exceed 0.1%. Fiber winding layer, with a spiral winding angle of 80 ° u26102X, and an axial tensile strength of not less than 15MPa.

Congratulations On The Successful Trial Run Of The FRP Storage Tank

On February 15th, 2023, our company successfully tested the FRP storage tank produced for the water treatment company. Our company adheres to the principle of "quality creates value, service earns respect, reputation builds brand", and aims to promote energy-saving, environmental protection, and healthy ecological and civilized environmental services. We continuously strengthen our awareness of quality, service, and brand, and have gained market recognition and recognition. The company's main products include FRP storage tanks, pipelines, FRP flues duct, stacks, spray pipes, cable trays, gratings, sign piles, and other FRP series products. The products are mainly used in industries such as chemical, paper-making, water supply and drainage, seawater desalination, and water treatment.